CONCRETE LABORATORY PRODUCTS
MORTAR SULFUR TYPE A, ACCORDING NF P 18-416
The mortar sulfur SNL TYPE A is a hot melt mortar ready for the polishing of concrete and mortar at normal and high performance. Laboratory tested for concrete to 60 MPa.
It is guaranteed by the S NL for the surfacing of specimens whose resistances are between 0 and 60 MPa.
This product are made from a mixture 60% sulfur and 40% sand with a nearby compressive strength of 24 M Pa.
Mortar Type A SNL is a composition based on sulfur, easy to use, molding hot and cold with high mechanical strength, which minimizes deviations between specimens of the same series and get the mechanical resistance values closest to reality.
Surfaces of all specimens mortars or concretes with strengths to 60 MPa. Strongly recommended for specimens with the resistors around 40/ 60 MPa.
Instructions for use
Mortar Type A SNL should be heated to a temperature between 130 and 135 ° C in order to have the desired fluidity. This temperature must be maintained during use; lower or higher temperatures result in a thicker product.
Mortar Type A SNL should be well homogenized before and during use to avoid sedimentation loads (note that this is also true for traditional surfacing mixture: sulfur / sand).
- Material: powder
- Colour: yellow
- Density: 0.8 to 0.9
Plastic bag of 10 kg.