AGGREGATE LABORATORY PRODUCTS
SAND MANUFACTURED ON DEMAND
Sands used by SNL are natural, siliceous for all the fractions, from the finest to the coarsest (6.3 mm). They are clean; their grains are generally of rounded shape.
They are dried and screened so as to be classified in various fractions.
So as to meet specific customer demand, our factory performs sand recomposition and homogenisation in a mixer which will match grading requirements (value and variability) determined by the client.
- The sands comply with local or national standards: Indian Standard IS 650 in 3 fractions of sand, Columbia standard BS 4550 part 6, BS 1881 from 131 next 5 sand fractions, ASTM C144-02, BS 1377 from 9 to work civil engineering, etc.
- Reconstitute the sand of the former riverbed (study of river flows and floods and dam released study).
- Create neutral substrata for environmental studies mesocosm.
- Sands with sizes and colors suitable for study by simulation of avalanches.
- Reconstitute sand with porosity up chosen.
- Selected size of Sand and statistically validated to ensure laboratory sieve.
- Pickling quartz sands to clean the laboratory mills.
- Sands for various water filtration following nh 12901
- Sand ASTM mesh 40-60; 20-35 mesh ASTM or any sort of mesh (cut)
- Sand according to EN 168 (wear glasses)
- Sand 0.04-0.4 mm wear water meter test
- Sand ARIZONA ISO 12103-1 all sizes
- Sand beach – less than 1 mm base of the NF P 15 403 (test dive equipment)
- Sand according to DIN 949
- Standard sand NF EN ISO 12956
- Standard sand NF EN ISO 18862
- Standard sand ” carpet nettoyability CC 005″ for test of cleaning for cars
- Standard sand for wear test for clothes
- Standard sand for wear test for carpets
Controls, grading, mass, humidity or anything else if needed, are carried out in the SNL lab.
The sand packaging can be done in small bags, calibrated in mass (1.4 kg maximum) or in bulk in paper bag from 1 kg to 25 kg; other packaging can be done on demand.