SAND FOR HYDROCARBON BINDERS NF T 66-061
Anhydrous binder antistripping efficiency test
USAGE
Essai d’efficacité du dopage des liants anhydres
CHARACTERISTICS
The sand is natural siliceous sand with a water content lower than 0.1 %. The constituent grains are uncrushed and round-shaped. They have a silica content higher than 98%.
It is packaged in polyethylene bag of 1000 ± 10 g.
Deliveries are made in boxes of 20 bags weighing 20.5 kg and in pallets of 36 to 45 boxes with a gross weight of 750 to 935 kg, suitably protected by a polyethylene cover (road transport) or reinforced boxes (international).
CONTROLS
Grading requirement of this sand is fixed by NF T 66-061. It corresponds to 0.1/0.63. The sand average grading is:
| Square mesh size in (mm) | Cumulative passing (%) | ||
|---|---|---|---|
| Average grading | SNL spécifications | NF T 66061 | |
| 1.25 | 100 | 100 | |
| 0.63 | 100 | 90 to 100 | maxi |
| 0.5 | 98.8 | ||
| 0.315 | 48.7 | ||
| 0.2 | 9 | ||
| 0.1 | 1 | 0 à 10 | mini |
| 0.08 | 0.4 | 0 à 1 |
Grading is controlled by 200 kg of sand. Water content is measured by 1000 kg batches.
CONFORMITY
Controls are carried out by SNL Laboratory.
